Wednesday, March 29, 2017

communication device is the rodenberry communicator. universal translator. cyborg terminology, they have become a form of survival. semiotics and semantics mind to body coordination hedgigers ready at hand. levels of difference think as a spectrum what is it closest to. yo yo ma different bow makes different art. a better interface than a sound board

arduino codes merged
setup
and loop vars and refs
also functions

Monday, March 27, 2017

3/27

led
resistor
photocell
photo cell in a zero and ground
use the arduino to measure sensor give it code to have ability to measure
pin mode but it is on the analog mode analog is in always
LED IS ON PIN 13 and ground
int value creates a loop

int value = analogRead(photoPin);
Serial.println(analogRead(photoPin));

if(value <=817){      817 is the reading in a regular room the number will be tuned depending on the amount of light that it picks up
digitalWrite(ledPin, HIGH);
else if (value >=0 && value <=299){
analogWrite(ledPin, 255)
}
else{
analogWrite(ledPin, 0)
}
else {
digitalWrite(ledPin, LOW);
}
delay(25);

successfully set up a sensor what to do with a number? make it do work at different numbers make something do something else.
temperature sensor can be up to a thousandth of a degree. analog is measured on a set 8 bit of data. this device has a range goes from zero to a maximum analog measure from 0 to 1024 half 518 is a range own the sensor it reads max and min amount of resistance. resistance doesn't matter the reading does matter. analog write must be between 0 and 255
if, else, and if else statements. anything you want run as code within an if statement.

Monday, March 20, 2017

Moisture sensor

For My final project i plan to create a moisture sensor with a led screen. The screen will display emotion depending on the moisture reading. The usability of this device will be enormous. it will tell one when a plant is dry or it can check when something is wet and notify the user. the device will be a visual design. http://www.instructables.com/id/More-Humane-Moisture-sensor/?ALLSTEPS

This device will be used to monitor underpants. During the night or even during the day the device will notify the user or someone monitoring the user if moisture begins to collect. Notifications will be made by a blinking light.

parts list

screen for visual/ leds
moisture sensor
casing
power source
(how to connect)
look for parts

Project idea

Communication watch
Cellphone tie
http://www.instructables.com/id/Communicator-Watch/?ALLSTEPS
My idea is to create a device that is an every day wearable. this wearable will have a cellphone/ 2 way radio/ transmitting device on it. the use of this device will be to allow users to easily communicate with an external being from a distance.
figure out a scenario that is straightforward then have cultural meaning. Change the lighting on air temperature. Problem to solve, why would you?

Monday, March 6, 2017

final in 2 parts
equally weighted
first is the physical product formalist issues cultural mechanical
second is Sensor, monitor, clothing assisted device input out put device
http://www.instructables.com/id/Making-Glove-One-a-3D-printed-wearable-cell-p/
http://www.instructables.com/id/Wearable-Mouse/
http://www.instructables.com/id/A-wearable-sound-to-light-display-without-a-micro/

The good, the bad, and the hungry?

http://www.instructables.com/id/Homemade-Vape-Pen-e-cig/
example of the ugly
this link shows how to construct a e cig vaporizer. the parts list consisted of images and a very wordy explanation of what the components are made of. The issue is that the parts are already constructed and the writer stated that the parts were made out of scrap material. All i could think is how in order to build this device one would need much more information before even being able to start.
/http://www.instructables.com/id/Digital-Window-Sticker-Arduino-Controlled/

this example is a good one.

I would totally make this project. the parts list is listed for the user and it even includes a a pricing guide. The author included where their parts were ordered from. The detail definitely shows a lot of time and effort into making this project. The piecing together was very cool and the interactive project made me want to start ordering the parts immediately. 
http://www.instructables.com/id/Oil-Drain-Pan-Free/
this one was stupid simple

Wednesday, March 1, 2017

ARDUINO

sketch structure;
void setup();
pinMODE(PIN,OUTPUT);
void loop();
statements;
 syntax
type, name, perameter, run

digitalWrite(pin,HIGH);
delay(1000);
digitalWrite(pin,LOW);

typefunctionname(parameters){

statements;
}
variable
int inputVariable = 0
int x= analogRead(2)

TYPES:::

BYTE 8 BIT NUMERICAL NUMBER saves memory
whole number between 0-255

Integer 16 bit -32,768,to 32,767

float is a decimal number

int myArray[]={.180, 255, 36, 2}

int myArray[5]= {} declare slots with []

myArray[3];